SketchUp Exterior Facade Modeling and V-Ray Rendering

Our facade modeling V-Ray series is a free seven-lesson course that takes a building facade from a SketchUp drawing all the way to a render. First we model the facade, then we prepare the materials. Finally we move on to the render settings. In this article we cover the flow of the series, what to prepare before you start, and the mistakes we see most often.
When we recorded the lessons, we were using an older version of V-Ray. That is why the menus look a little different from today’s interface. But the modeling order, the material logic and the basics of the light settings are still the same. So anyone watching the lessons today can easily apply the same method in their own version.
Facade modeling V-Ray playlist
All the lessons in the series are in a single YouTube playlist. The first video is a short introduction of about two minutes. The following lessons go through the modeling, material and render steps in order. We recommend watching the list in order from start to finish.
YouTubeWhat topics does the series cover?
As we wrote in the video description, the series covers the exterior material and render stages step by step. You will find the render settings in the last lessons of the series. An exterior project usually follows this order, and the series is built the same way: (The video is in Turkish; this guide walks through the key steps in English.)
- Facade model: You draw the walls, window openings and projections to create the main outline of the building.
- Material prep: You assign suitable materials to surfaces such as plaster, stone, wood or glass.
- Light and camera: You set the sun direction and camera angle to show the facade at its best.
- Render settings: Finally you set the quality options and render the image.
Getting ready for facade modeling in V-Ray
Before you start the lessons, you should be comfortable with SketchUp’s basic tools. The Push/Pull, Offset and Move tools in particular are the foundation of facade drawing. We also recommend learning how groups and components work beforehand. If you turn repeating parts such as windows and frames into components, the model stays much more organized.
On the render side, you need V-Ray installed on your computer. You can check the current version and system requirements on the V-Ray for SketchUp page. That way you can repeat the same steps on your own computer while you watch.
What should you watch for while modeling?
A good render starts with a clean model. So pay attention to face orientation while you draw the facade. Reversed faces make materials look wrong in the render. Faces that overlap each other also cause blotches in the lighting.
Another important topic is layers, or tags. If you keep walls, frames, glass and landscape elements on separate tags, editing before the render becomes much easier. For example, you can hide the landscape temporarily and focus only on the facade.
Choosing facade materials
Materials are one of the most important steps in defining the character of a facade. The same building looks plain and modern with white plaster. With stone or wood cladding it feels much warmer. So before you move on to materials, get the overall language of the facade clear in your head.
Also pay attention to the scale of your materials. If a stone or brick texture is too large, the building looks like a scale model. If it is too small, the surface turns into a flat, repetitive pattern. Use real-world dimensions as your reference and the result will be far more convincing. If you are looking for quality textures, choose materials that come with reflection and bump maps. These maps add depth to the facade.
Render settings after facade modeling in V-Ray
Once the materials are done, it is time for the render settings. In an exterior scene, sunlight is the deciding factor. The sun angle directly affects the shadows and relief on the facade. So try different times of day and pick the angle that shows the facade best.
If you want to see the render settings in more detail, take a look at our exterior render settings lesson. If you want to work on a bigger project, our villa modeling series is a good next step.
Common mistakes
The mistake we see most often is moving on to materials before the model is finished. Later changes make the materials shift and waste your effort. The second mistake is running test renders at very high quality settings. Work with low settings while testing and raise the quality for the final image. You save time and do not overload your computer.
Finally, save a copy of your file at every important stage. That makes it very easy to go back to an earlier state when you make a mistake.
These two related articles will also help: SketchUp Exterior Modeling 04 and Toward the Render: SketchUp Facade Modeling 05. Our SketchUp training guide also shows you where to go next, step by step.
Frequently asked questions
Is the facade modeling V-Ray series suitable for beginners?
Yes, if you know the basic SketchUp tools. If you do not, we recommend starting with the basic lessons first.
Can I follow the lessons with the current version of V-Ray?
Yes, you can. The menus have moved, but the modeling and render logic stays the same.
How many lessons are in the series?
There are seven lessons in the playlist. The first one is a short introduction, and the render settings come in the last lessons.
