Lumion 11 Interior Render: Camera, Lighting and Framing

A Lumion interior render takes a bit more effort than an exterior one. In this lesson we visualize an interior with Lumion 11 and learn some basic principles of interior scenes. By the end of the lesson you create your own interior render in Lumion. In this post we focus on the output settings we pay attention to when taking the final image.
We also covered the same lesson from the angle of lighting principles and model preparation in our Lumion interior tutorial post. If you read both posts together, you see the topic from both the preparation side and the output side.
Lumion 11 interior render video
The video runs about 17 minutes. You can find the download link for the sample model we use in the lesson in the video’s YouTube description. That way you can try the steps on exactly the same scene.
YouTubeBefore you switch to Photo mode
In Lumion, the screen where you arrange the scene and the screen where you take images are separate. After preparing the scene you switch to Photo mode and set up the camera and effects there. But a few checks before switching to this mode save time. (The video is in Turkish; this guide walks through the key steps in English.)
- Materials: Make sure every surface has the right material.
- Light sources: Check the position and intensity of the lamps one last time in Build mode.
- Objects: No furniture should float in the air or sink into a wall.
- Glass: Check that the window glass really looks transparent.
Make this list a habit. A mistake you notice in Photo mode sends you back to Build mode.
Camera angle and framing
In an interior, the camera sits much closer to objects than in an exterior. So the camera angle directly determines the quality of the image. A height close to eye level usually gives the most natural result. Also make sure vertical lines stay straight.
A wide-angle lens makes small rooms look bigger. But an extreme wide angle causes distortion at the edges. So choose a moderately wide angle for an overview shot that introduces the room. To show details, add a second camera with a narrower angle.
Exposure and effects for a Lumion interior render
Lumion’s effects system is the most powerful tool for setting the mood of the image. You set overall brightness with exposure and the tones with color correction. Shadow and reflection effects add depth to the room. But you do not have to add every effect.
As a general method, start with only a few effects. First balance the exposure and check the dark corners. Then increase the reflection quality. Next, adjust the color temperature to suit the character of the room. Look at the image after each change and turn off the effects you do not need.
Resolution and render time
When taking the final image, choose the resolution based on where it will be used. Medium resolution is enough for on-screen presentations or social media. Print and large-screen presentations need a higher value. Remember, render time grows as resolution goes up.
So take your test renders at low resolution. When you like the result, save the final image at high resolution. That way you do not wait a long time for every small test. The power of your graphics card also directly affects render time.
Checking the Lumion interior render afterward
After saving the image, examine it carefully at full screen. Look for material seams, blown-out lights and shadow errors. If you notice a small problem, go back to Photo mode and fix only that setting. If needed, lightly polish the image in a photo editing program.
Most of the problems that come from moving the model from SketchUp to Lumion show up at this stage. We collected tips about the transfer in our exporting from SketchUp to Lumion post. For the current version of the program, take a look at Lumion’s official website.
From interior to exterior
In our Lumion 11 course we also covered exterior visualization in a separate lesson. When you watch the interior and exterior lessons together, you learn the program’s whole workflow. The logic of lighting and camera in particular is similar in both settings. For the exterior lesson, head to our Lumion 11 exterior lesson post.
Frequently asked questions
Why does my Lumion interior render come out dark?
In an interior, light only comes from windows and lamps. Increase the exposure a little and add small light sources to the dark corners.
Where can I download the sample model?
The download link for the model we use in the lesson is in the video’s YouTube description. Working with the same scene makes it easier to follow the steps.
Is the lesson still valid in newer Lumion versions?
We made the lesson with Lumion 11. The interface changes in newer versions, but the logic of camera, exposure and output stays the same.
