V-Ray Material Settings: Interior Visualization Course, Part 05
V-Ray material settings are one of the most important steps in making an interior image look real. We are in part five of the SketchUp V-Ray high-quality interior visualization course. This is one of the longest parts of the series, and alongside it we have summarized the basic logic of materials in this article. That makes it easier to see why each setting works while you watch the video.
The part runs about 20 minutes. So we suggest watching the video in sections and trying each step in your own model.
V-Ray material settings: part 05 video
Open the video and keep your own scene ready next to it. You learn materials best by experimenting.
YouTubeWhat layers make up a V-Ray material?
V-Ray materials imitate how real-world surfaces interact with light. Each material is made of a few basic layers. Once you know these layers, you can build almost any surface yourself. (The video is in Turkish; this guide walks through the key steps in English.)
- Diffuse: The base color or texture of the surface. The wood grain or the wall color lives in this layer.
- Reflection: Sets how much the surface reflects. It is very low on a matte wall and high on a polished floor.
- Glossiness: Sets how sharp the reflection is. A low value gives a blurry reflection, a high value a clear, mirror-like one.
- Bump: Plays with light to give the surface a slight sense of relief. It makes a difference on surfaces such as plaster, leather or fabric.
What to watch for when setting V-Ray materials
The most common mistake we see in interiors is leaving every surface at the same glossiness. In real life, no surface is completely matte or completely glossy. Even a painted wall carries a slight reflection. But because that reflection is very blurry, our eyes don’t notice it.
So when you raise the reflection value, think about glossiness at the same time. For a polished wood floor, increase the reflection and keep the glossiness at a medium level. The floor then looks like real parquet, not plastic. V-Ray also uses Fresnel reflection by default. This means the reflection gets stronger when you look at the surface from a grazing angle rather than straight on. This effect adds a lot to realism.
Texture scale and placement
Even a beautiful texture ruins the scene at the wrong scale. For example, parquet at too large a scale makes the room look like a toy. A texture at too small a scale turns into a repeating pattern. So set the texture size to real dimensions. The size of a parquet plank or a tile is a good reference here.
The direction of the texture matters too. Make the wood grain follow the form of the furniture. In SketchUp, you can right-click the texture and adjust its placement with the Texture Position command.
Ready-made materials or your own?
V-Ray offers a large library of ready-made materials. They are very handy for a quick start. But every project has its own language. So treat ready-made materials as a starting point and adjust them to your needs.
If you are curious about building a material from scratch, take a look at our lesson on creating your own high-quality material. You can find current information on V-Ray material features on Chaos’s official page.
How V-Ray material settings relate to lighting
Material and light are not independent of each other. The same material looks completely different under different light. That is why we recommend moving on to material settings only after the lighting setup is in place. We covered the lighting setup in part 4 of the series.
We also wrote about the same part from the angle of reflective surfaces. For difficult materials such as glass, mirror and metal, go to the other article on part 5.
A practical order for V-Ray material settings
Following a set order when you start a new material makes the job easier. First, settle the diffuse color or texture. Then set the reflection and glossiness values. After that, add bump if needed. After each step, render a small region. That way you clearly see what each setting changes. Also note down the values you like, so you can quickly return to them for similar materials.
Frequently asked questions
Which value matters most in V-Ray material settings?
There is no single value, but the balance between reflection and glossiness is the pair that affects realism most. Adjust these two together.
Why do my materials look like plastic?
This usually happens when the reflection is too strong and too sharp. Try lowering the glossiness value a little.
Do my SketchUp materials work in V-Ray?
Yes, V-Ray automatically converts SketchUp materials into its own materials. You then add settings such as reflection yourself.
