Skip to content
Tuesday, November 17, 2026
New

Try: vray, plugin, render · Press Esc to close

SketchUp V-Ray

V-Ray Dirt Texture: Interior Visualization Tutorial 06

Share

The V-Ray Dirt texture gives interior images that much-wanted sense of depth and a lived-in feel. We are in the sixth part of our SketchUp V-Ray high-quality interior visualization tutorial. The part’s YouTube tags include #vraydirt. In this post we explain the logic of the VRayDirt texture and where it helps in an interior.

The part runs about 9 minutes. It is a short but effective topic, so be sure to try it in your own scene after watching the video.

V-Ray Dirt texture: part 06 video

Keep your own model open while you watch. You understand the dirt effect best by comparing before and after renders.

What is VRayDirt?

VRayDirt is a texture that detects corners and joints where objects come close to each other. It produces one color at these points and another color everywhere else. In real life, too, the places where the wall meets the floor, the areas under furniture and inside corners look a little darker. That is because less light reaches these areas. Dust and dirt also build up there over time. (The video is in Turkish; this guide walks through the key steps in English.)

VRayDirt imitates this natural effect. Objects sit more firmly on the floor and the scene becomes more convincing.

The V-Ray Dirt texture step by step

The general method is quite simple. You connect the dirt texture to a material’s diffuse layer. Then you set two basic colors.

  • Occluded color: The color that shows at corners and joints. We usually pick a dark tone.
  • Unoccluded color: The color that shows in open areas. You connect the material’s actual color or texture here.
  • Radius: Sets how far the effect spreads from the corner. A small value gives a thin shadow, a large value a wide darkening.

The material keeps its normal color in open areas and darkens slightly at the corners. Keep the radius small in your first tests. An exaggerated dirt effect makes the image look dirty and neglected.

Where should you use it in an interior?

The dirt effect does not give the same result on every surface. It looks very natural on some surfaces and is unnecessary on others. These are the areas where it works best.

  • Where the floor meets the skirting board: A thin dark line between wall and floor adds depth to the space.
  • Under furniture: The areas where sofas and cabinets sit on the floor look more realistic.
  • Joints and grout lines: A slight darkening between tiles gives the surface a natural look.
  • Old and rustic materials: On stone, old wood and concrete surfaces it imitates the marks of time.

Edge wear with the V-Ray Dirt texture

A less known use of the dirt texture is edge wear. When you turn on the invert normal option, the effect appears on the outer edges instead of the corners. With this method you can create a table edge with slightly chipped paint or a worn door frame. Use this effect carefully, though. Wear marks look out of place in a new, modern space.

Dirt vs. ambient occlusion

Many users confuse VRayDirt with ambient occlusion. Both create a similar effect, but they are used differently. Dirt is a texture and works per material. So you decide on which surface, and how strongly, you want the effect. Ambient occlusion is usually a general setting applied to the whole scene at once.

We also covered the same part from the ambient occlusion angle. To compare the two methods, take a look at the other post on part 6. You can find up-to-date information on textures on Chaos’s official V-Ray for SketchUp page.

Previous and next parts of the series

The dirt texture works together with materials. If you have not settled your material settings yet, go back to our part 5 post. After this part, you can continue with part 7 of the series.

Fine-tuning the V-Ray Dirt texture

Once you get the first result, refine the effect step by step. First keep the radius small and take a test render. Then shift the occluded color from pure black to a dark gray or brown. This small change makes the effect look much more natural. You can also soften the transition with the falloff setting. In short, the goal is a subtle depth that the viewer feels without noticing.

Frequently asked questions

Does the V-Ray Dirt texture increase render time?

A little, especially when the radius is large. Small, controlled values hardly affect the time.

Why does the dirt effect look so dirty in my image?

Most likely the radius is too large or the occluded color is too dark. Lower both values to get a subtler effect.

Should I add the dirt texture to every material?

No, add it only to surfaces where it makes a difference. Floors, the areas under furniture and joints are usually enough.

1
Share

Leave a comment

Your email address will not be published.

Message us